Exhibition
Hillhead Success for Bunting
The Hillhead quarrying, construction and recycling show (Buxton, UK, 25-27 June, 2024) was blessed with a decent spell of weather for the throngs of international visitors. Bunting’s ideally located stand, on the downslope towards the pavilion, was busy for the whole 3-days. Bunting has exhibited at Hillhead for decades, with metal detectors, magnetic separators and…
Read MoreHigh Intensity Magnetic Separation at UK Mining Conference
High intensity magnetic separation and enhanced tramp metal magnetic separation is the focus for Bunting at the UK Mining Conference in Cornwall, UK (12-13 June 2024). High-profile delegates including investors, brokers, operators, and the mining supply chain attend the two-day conference, held at the historic Princess Pavilion in Falmouth in Cornwall. The recent rise in…
Read MoreMetal Separation at E-Waste World Conference 2024
Maximising metal separation and recovery from e-waste is the focus for Bunting on stand C60 at the E-Waste World Conference and Expo (26-27 June 2024, Messe Frankfurt, Germany). The Bunting team is joined on the stand by their local representative Marcel Graef from 3SMI. The global production of e-waste rose to 62 million tonnes (Mt)…
Read MoreBunting Attracts Crowds at IFAT 2024
There was a constant stream of visitors on Bunting’s stand at the IFAT Munich 2024 (13-17 May). Bunting’s multinational team from the UK, Germany, Italy, and the USA talked metal separation with visitors from around the world. IFAT is the world’s leading trade fair for water, sewage, waste and raw materials management. “IFAT provided the…
Read MoreElectroMax Overband Magnet Power at Hillhead 2024
The compact but powerful characteristics of the ElectroMax Overband Magnet are highlighted on Bunting’s stand C9 at the Hillhead quarrying, construction and recycling show (25-27 June, 2024). The ElectroMax is accompanied on the stand by the TN77 and meTRON 05D metal detectors, and a permanent suspension magnet. Solving Metal Separation Problems at Hillhead Magnetic separators…
Read MoreHigh-Intensity Magnetic Separation at Ceramitec 2024
High-intensity magnetic separators reduce rejects, rework, and increase ceramic whiteness. On Bunting’s stand A6 323D at Ceramitec 2024 (9-12 April, Munich, Germany), ceramic engineers and ceramic mineral processors can find out about the latest high-intensity magnetic separation technology for both wet and dry processes. Keeping Ceramic Glazes, Slips and Bodies Free of Magnetics Fine iron…
Read MoreEnhanced Metal Recovery with Bunting at IFAT 2024
Technology to effectively separate large and small ferrous and non-ferrous metal is the focus for Bunting at IFAT Munich 2024 (Messe Munchen, Germany, May 13-17). Advanced designs of magnetic separators, eddy current separators and electrostatic separators separate strongly and weakly magnetic particles, enabling the successful recycling of a wide range of waste materials. On stand…
Read MoreWhere to see Bunting-Redditch in 2024
Bunting’s magnetic separators, eddy current separators, metal detectors, and electrostatic separators are on tour again in 2024. As of January 2024, Bunting-Redditch is exhibiting at the following shows and conferences: Ceramitec 2024 (9-12 April 2024 – Munich, Germany Ceramitec is the leading international trade fair for the ceramics industry. Ceramic engineers and specialists convene from…
Read MorePhysical Metal Separation at ICBR 2023
Applying physical metal separation technology, such as magnetic and electrostatic separation, is the focus for Bunting at the International Congress for Battery Recycling – ICBR (6-8 September, Valencia, Spain). On booth 17, Bunting’s team of specialist engineers are highlighting technological advances to overcome the challenges of separating and recovering critical metals present in batteries. ICBR…
Read MoreKeeping Plastic Metal-Free at PLAST 2023
Separating and detecting problematic metal contamination is the focus for Bunting at PLAST 2023 (5-8 September 2023, Milan, Italy). Live demonstrations on stand B172 in hall 13P will show equipment including metal detectors, eddy current separators and drawer filter magnets removing metal from virgin and recycled plastic. PLAST, held in Milan, Italy every three years,…
Read More