High Intensity Magnetic Separator Optimises Copper Recycling

High inensity magnetic separator

Around 50% of copper used in Europe is obtained from recycling rather than newly mined ore (International Copper Study Group – ICSG). Indeed, copper is widely regarded as one of most recycled engineering metals with much of the world’s globally mined copper, some 0.32 trillion kilogrammes, still in circulation. In a typical home there is…

Read More

Metal Recovery from Electric Vehicles

Bunting Redditch

Click here to see our solutions for metal recovery from Electric Vehicles Mining the Urban Environment The anticipated global increase in production and consumption of electronic goods and electric vehicles puts a huge strain on raw material reserves. Subsequently, the focus has turned from mining raw materials to reclaiming, reusing and recycling secondary materials. This…

Read More

6 Inline Magnets for Plastics Producer

In line magnetic separator

Six (6) Inline Magnetic Separators (PIMS) are due to be installed in a UK plastic production facility.  The project originated from a discussion at the Interplas exhibition in 2017. The Inline Magnetic Separator offers great versatility with ease of installation and maintenance.  Inside the tube-like body is a strong Plate Magnet.  This ensures that there is no restriction to…

Read More

Metal Removal when Recycling Rubber Tyres

Metal separation - Rubber crumb

Successfully removing metal from rubber (originating from the metal wire in a tyre) when recycling tyres is critical, especially as rogue metal can cause injury to horses and children who run and play on the recovered rubber crumb.  Although each tyre recycling plant is different, here is a guide to the common types and location…

Read More

Magnetic Disc Separator Processes Beach Sands

Magnetic Disc Separator Processes Beach Sands

Bunting’s latest Magnetic Disc Separator (MDS) is for processing and separating key minerals from a beach sands deposit.  The three-stage Magnetic Disc Separator is destined for a mineral processing operation in Africa. The Magnetic Disc Separator Magnetic Disc Separators (MDS) enable an accurate separation of minerals with varied magnetic susceptibilities.  Typically, a Magnetic Disc Separator…

Read More

Special Offers for Global Recycling Day

Global Recycling Special offer banner

The Global Recycling Foundation created the Global Recycling Day in 2018 to help recognise and celebrate the importance recycling plays in preserving our precious primary resources and securing the future of our planet.  They state that ‘It is a day for the world to come together and put the planet first’. In 2020, Global Recycling…

Read More

Tramp Metal Removed from Reclaimed Kaolin

Open and closed bullet magnet

A major UK mineral processing company has installed two large Bullet Magnets to remove tramp ferrous metal from dry reclaimed kaolin. After initial discussions, Bunting conducted controlled tests in the Redditch Centre-of-Excellence.  The reclaimed kaolin had a broad particle size range, with 95% below 250 microns.  Iron contamination was approximately 1000ppm (although it could peak…

Read More

3 Overband Magnet Installation Problems

Overband magnet at processing plant

The Permanent Overband Magnet is one of the most commonly used magnetic separators.  Overband Magnets are found in most recycling plants recovering steel cans and other ferrous metals from a wide range of waste materials as well as in quarries (protecting crushers & screens) and on mobile plant (screens and crushers).  However, incorrect installation leads…

Read More

Three High Sensitivity Metal Detectors for Nappies

High sensitivity metal detectors

An Egyptian paper mill has purchased three meTRON 07 CI Metal Detectors mounted on conveyors to detect metal in the tissue paper used as the filler in the manufacture of baby’s disposable nappies. The three meTRON Metal Detectors are identical in size and specification.  Each has a 400mm wide belt passing through a 450mm wide…

Read More

Bunting at IERC 2020

Waste Electrical Equipment

Bunting is exhibiting at the 19th International Electronics Recycling Congress (IERC) in Salzberg, Austria (21-24 January 2020). At the congress, the Bunting team will be helping electronics waste recycling companies introduce and improve metal separation in terms of recovery and purity. IERC 2020 is the electronics recycling industry’s leading event, bringing together recycling professionals from…

Read More